Skip to content
Free shipping over £150*
Free shipping over £150*

Extractor Fans

Filters

Extractor Fans Shop extractor fans at RS Electrical Supplies. Mechanical ventilation is a Building Regulations requirement in bathrooms, en-suites, shower rooms, and kitchens, helping to remove...

Extractor Fans

Shop extractor fans at RS Electrical Supplies. Mechanical ventilation is a Building Regulations requirement in bathrooms, en-suites, shower rooms, and kitchens, helping to remove moisture-laden air to reduce moisture, condensation, damp, and mould. We stock extractor fans from Blauberg UK, a specialist ventilation manufacturer known for quiet, energy-efficient fans suited to domestic and light commercial installations.

Extractor Fan Types Available

  • Axial bathroom extractor fans — wall or ceiling-mounted fans for direct extraction through an external wall or short duct run; the standard choice for most domestic bathrooms and shower rooms
  • Inline extractor fans — duct-mounted fans installed within the duct run rather than at the point of extraction; suitable for longer duct runs, multiple room extraction, and loft installations where a quieter result is required at the grille
  • Centrifugal extractor fans — higher static pressure fans for longer or more complex duct runs where axial fans would be insufficient

Key Considerations When Choosing an Extractor Fan

  • Extract rate — Building Regulations Part F requires a minimum of 15 litres/second (54m³/hr) for bathrooms and 30 litres/second (108m³/hr) for kitchens; always check the fan's rated extract rate against the room volume
  • Duct diameter — most domestic fans use 100mm (4") or 125mm (5") duct; match the fan to your existing duct size
  • Timer or humidity control — overrun timers keep the fan running after the light is switched off; humidity sensors activate the fan automatically when moisture levels rise
  • Noise level (sone/dBA) — lower sone ratings indicate quieter operation; important for en-suites and bedrooms
  • IP rating — IP44 minimum for bathroom Zone 1 and Zone 2 installations

Installation of extractor fans must comply with Building Regulations Part F (ventilation) and BS 7671 wiring regulations. Order today with fast UK delivery from RS Electrical Supplies.

Extractor Fans Shop extractor fans at RS Electrical Supplies. Mechanical ventilation is a Building Regulations requirement in bathrooms, en-suites, shower rooms, and kitchens, helping to remove...

Extractor Fans

Shop extractor fans at RS Electrical Supplies. Mechanical ventilation is a Building Regulations requirement in bathrooms, en-suites, shower rooms, and kitchens, helping to remove moisture-laden air to reduce moisture, condensation, damp, and mould. We stock extractor fans from Blauberg UK, a specialist ventilation manufacturer known for quiet, energy-efficient fans suited to domestic and light commercial installations.

Extractor Fan Types Available

  • Axial bathroom extractor fans — wall or ceiling-mounted fans for direct extraction through an external wall or short duct run; the standard choice for most domestic bathrooms and shower rooms
  • Inline extractor fans — duct-mounted fans installed within the duct run rather than at the point of extraction; suitable for longer duct runs, multiple room extraction, and loft installations where a quieter result is required at the grille
  • Centrifugal extractor fans — higher static pressure fans for longer or more complex duct runs where axial fans would be insufficient

Key Considerations When Choosing an Extractor Fan

  • Extract rate — Building Regulations Part F requires a minimum of 15 litres/second (54m³/hr) for bathrooms and 30 litres/second (108m³/hr) for kitchens; always check the fan's rated extract rate against the room volume
  • Duct diameter — most domestic fans use 100mm (4") or 125mm (5") duct; match the fan to your existing duct size
  • Timer or humidity control — overrun timers keep the fan running after the light is switched off; humidity sensors activate the fan automatically when moisture levels rise
  • Noise level (sone/dBA) — lower sone ratings indicate quieter operation; important for en-suites and bedrooms
  • IP rating — IP44 minimum for bathroom Zone 1 and Zone 2 installations

Installation of extractor fans must comply with Building Regulations Part F (ventilation) and BS 7671 wiring regulations. Order today with fast UK delivery from RS Electrical Supplies.

Blauberg 100mm Fixed Grille Brown

Blauberg UK
Original price £5.68 - Original price £5.68
Original price
£5.68
£5.68 - £5.68
Current price £5.68

This Blauberg 100mm plastic vented fixed blade air ventilation louvred grille is the perfect termination point for extractor fans in any ventilatio...

View full details
Original price £5.68 - Original price £5.68
Original price
£5.68
£5.68 - £5.68
Current price £5.68

Knightsbridge 100mm Extractor Fan with Timer & Humidistat EX1THWH

Knightsbridge
Original price £49.95 - Original price £49.95
Original price
£49.95
£49.95 - £49.95
Current price £49.95

Knightsbridge 100mm Extractor Fan with Timer & Humidistat The EX1THWH is a quiet IP45 100mm extractor fan from Knightsbridge, finished in white...

View full details
Original price £49.95 - Original price £49.95
Original price
£49.95
£49.95 - £49.95
Current price £49.95

Knightsbridge Matt White IP45 100mm LED Backlit Extractor Fan with Timer EX3TWH

Knightsbridge
Original price £46.95 - Original price £46.95
Original price
£46.95
£46.95 - £46.95
Current price £46.95

The EX3TWH is a quiet IP45 100mm LED-backlit extractor fan from Knightsbridge, finished in matt white and designed for wall or ceiling installation...

View full details
Original price £46.95 - Original price £46.95
Original price
£46.95
£46.95 - £46.95
Current price £46.95

Free shipping

When you spend £150.00+

Independant

Family run business

Chat with us

8-5pm Mon-Fri

Visit us

Open to trade & public